|
|
|
|
Material Safety Data Sheet Zorbie Products Ltd #28-34378 Manufacturer’s Way Sorbitec FG Premium Absorbent Abbotsford, B.C. V2S 7M1 December 2007 Tel: (888)-556-2407 Fax: (604)-557-2044
SECTION 1 IDENTITY
Product Name Sorbitec FG Product Identification Modified Cellular Polymer Foam Application/Use Absorbing Polymer for all types of spills Distributor Zorbie Products Ltd Emergency Contact Russ Simpson @ 604-290-2218
SECTION 2 COMPONENTS & INGREDIENTS
Contents Carbon (C)27.2%, Nitrogen(N)24.6%, Water (H20)43.3%, Ammon.Phosphate(N2H2PO4)3.3%, Water soluble salts 0.66$, Formalin(HCOH)0.04%, Sand(Mg/FeSiO4), Organic oil
This product consists of cellular polymer foam bound to a neutral dense silicate mineral with organic oil.
SECTION 3 HAZARDOUS IDENTIFICATION
Inhalation Incinerated at high temperatures will create nitrous fumes. Breathe fresh air
SECTION 4 FIRST AID MEASURES
Skin Contact No negative reactions known Eye Contact In case of contact, flush eyes with plenty of water for at least 15 minutes using an eyewash fountain, if available. Get medical attention if irritation occurs. Ingestion Avoid ingestion, however no known effects.
SECTION 5 FIRE MEASURES
Flammability Sorbitec FG will not ignite or burn. No explosion risk. Fire Fighting Product will disintegrate at temperatures <1200 °C. Firemen may consider breathing protection to avoid minor nitrous fumes.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Waste Disposal Incinerated or biological decomposition is recommended if any hazardous liquids have been absorbed; otherwise Sorbitec Fg may be disposed with general waste products.
SECTION 7 HANDLING AND STORAGE
Handling Procedure & Storing No special handling required. Keep product in original packaging to retain moisture. Food Plant and Industrial Use: Avoid contamination of food in application and storage. Do not use on food contact surfaces.
SECTION 8 EXPOSURE CONTROL / PERSONAL PROTECTION
Ventilation When handling large volumes of Sorbitec Fg, protect against excessive dust inhalation. Gloves If skin sensitivity, gloves should be considered Eyes Safety glasses or chemical splash goggles should be considered if there is a risk of getting dust particles in the eyes.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Product Consistency Loose granule Colour Light Green tint, mostly white with traces of sand Odor Slight resinous Soluble Stong Inorganic Acids Burning Point Approx. 1200°C (2200°F) Density ca 500 g/l Ph 6 Bulk Density 500 kg/m3
SECTION 10 STABILITY AND REACTIVITY
Stability Stable substance under normal conditions Reaction Minor reaction with inorganic acids in concentration above 30% Fire In a large fire, minor nitrous fumes could be emitted
SECTION 12 TRANSPORT INFORMATION
General Non hazardous in pure state Shipping Name Sorbitec FG Customs Registration No. NY J88757 Harmonized Tariff Code 3909.30.0000
SECTION 13 REGULATORY INFORMATION
Sorbitec FG absorbent is in compliance with the U.S. Environmental Protection Agency “Toxic Substance Control Act” (TSCA) rules, orders and regulations, including: Sections 4, 5, 6, & 7; Title 40 Chapter 1, Part 701.20 through 707.75; 40 CFR Sections 704.3, 710.2(e) and 720.3(c); and Sections 5 and 13, reference 42FR64583. Sorbitec absorbent materials are classified as, and meet all criteria and definitions of, an “Article”, and such are not subject to TSCA import classification, nor PreManufacture Notice (PMN).
This information is given in good faith but no warranty, expressed or implied is made. Zorbie Products Ltd will not be liable for any damages, losses, injuries or consequential damages which may result from the use of or reliance on any information contained herein.
This Material Safety Data Sheet is valid for 3 years. |
Send mail to
webmaster@zorbieproducts.com with questions or
comments about this web site.
|
